Alpha Centauri 2

Community => Recreation Commons => Our researchers have made a breakthrough! => Topic started by: Buster's Uncle on August 25, 2025, 03:26:46 pm

Title: Unconventional method to pull valuable metals from wastewater discovered
Post by: Buster's Uncle on August 25, 2025, 03:26:46 pm

Scientists discover unconventional method to pull valuable metals from wastewater — here's how it works
Calvin Coffee
The Cool Down (https://www.thecooldown.com/)
Mon, August 25, 2025 at 1:30 AM EDT
2 min read


(https://s.yimg.com/ny/api/res/1.2/3tSx8Utc3nWNIEue40gk3w--/YXBwaWQ9aGlnaGxhbmRlcjt3PTk2MDtoPTY0MDtjZj13ZWJw/https://media.zenfs.com/en/the_cool_down_737/8fb912ebcc0fd182efbf9b706641480f)
Scientists discover unconventional method to pull valuable metals from wastewater — here's how it works


A research team from Tsinghua University in Beijing has unveiled a powerful new technique to extract hazardous and valuable metals from industrial wastewater, using an unconventional method that combines electric pulses and swirling fluid motion.

This innovative electrochemical system enhances traditional metal recovery methods, offering a faster, cleaner, and more cost-effective way to retrieve essential materials like copper and potentially even precious and heavy metals from toxic industrial discharge.

The process is a major improvement over conventional approaches like electrodeposition, which often suffer from slow reaction speeds and low-quality metal yields due to limitations in how ions move and interact at surfaces.

The breakthrough method, published in the journal Engineering (https://www.sciencedirect.com/science/article/pii/S2095809924000018?via%3Dihub), addresses two key challenges in efficient metal recovery. It integrates a transient electric field and swirling flow to address both bulk mass transfer and interfacial ion transport simultaneously.

By experimenting with variables like electric voltage, frequency, and flow rate, the researchers found that their TE and SF system could recover copper 3.5 to 4.3 times faster than single-process methods, all while producing uniform, high-quality metal deposits.

The combination of fast ion movement and stable electrical charge transfer also helps avoid sludge buildup, corrosion, and chemical waste — all major issues with traditional removal techniques.

The team's findings show this synergistic method is not only efficient, but it is also widely applicable to metals with high redox potentials — referring to metals that are harder to recover using older techniques.

The technology holds immense promise for electronics, automotive, construction, and aerospace industries, where metal waste is common and costly.

Recovering metals like copper, nickel, and even lead from wastewater streams could reduce dependence on mining, preserve finite natural resources, and lessen the environmental and health toll of heavy metal contamination.

Left unchecked, metals such as arsenic, cadmium, and mercury can leach into water sources, accumulate in the food chain, and pose toxic risks to both humans and wildlife. Traditional removal techniques, like chemical precipitation or ion exchange, often involve harsh chemicals and produce toxic sludge that requires additional, sometimes dangerous, disposal.

By contrast, this new system reduces metal pollution at the source, turning waste into a resource and marking a major step toward an economy where materials are reused rather than discarded.

While a commercial rollout timeline has yet to be announced, the results from Professor Huijuan Liu's team show promising potential for real-world deployment.

It's a powerful example of how science and engineering can clean up our systems, reduce reliance on raw resource extraction, and support a cleaner, healthier future for all.

https://www.yahoo.com/news/articles/scientists-discover-unconventional-method-pull-053000261.html